- 浏览: 1199974 次
文章分类
最新评论
-
sucheng2016:
### Error querying database. C ...
Sybase数据类型 -
Jiafun:
加油吧,少年
这可能是人生最后一个暑假 -
hermesdai:
少年很努力啊...学习了
一名毕业生的程序员之路 -
panda_eyes:
...
一名毕业生的程序员之路 -
yyue_li1988:
哥们,你写却是挺好的。同样给我们这种工作一两年的人,感触颇深啊 ...
一名毕业生的程序员之路
关于sap的Logon的几个参数
1 Authorization updates completed without logging off
auth/new_buffering to 该参数设为4,权限的修改将立即起作用,不用用户重新登录. 如果有其他疑问请查阅note 209899.
2 Preventing multiple dialog user logons
login/disable_multi_gui_login 该参数可以设置同个client同个用户ID可以允许同时登录几个,当设为1时,系统将提示用户选择: 'Terminate the Current Sessions' or 'Terminate this Login.' ,以达到保证只允许一个登录.
3Profile Parameters for Logon and Password (Login Parameters)
To make the parameters globally effective in an SAP System (system profile parameters), set them in the default system profile DEFAULT.PFL. However, to make them instance-specific, you must set them in the profiles of each application server in your SAP System.
To display the documentation for one of the parameters, choose Tools®CCMS®Configuration®Profile Maintenance(transaction RZ10), specify the parameter name and choose Display. On the following screen, choose the Documentation pushbutton.
Password Checks
Parameter
|
Description
|
login/min_password_lng
|
Defines the minimum length of the password.
Default value: 3; permissible values: 3 – 40
Until SAP NetWeaver 6.40 (inclusive), up to 8 characters.
|
login/min_password_digits
|
Defines the minimum number of digits (0-9) in passwords.
Default value: 0; permissible values: 0 – 40
Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40 (inclusive), up to 8 characters.)
|
login/min_password_letters
|
Defines the minimum number of letters (A-Z) in passwords.
Default value: 0; permissible values: 0 – 40
Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40 (inclusive), up to 8 characters.)
|
login/min_password_specials
|
Defines the minimum number of special characters in the password Permissible special characters are, in particular, !"@ $%&/()=?'`*+~#-_.,;:{[]}/<>| and space
After SAP NetWeaver 6.40, all characters that are not letters or digits are regarded as special characters.
Default value: 0; permissible values: 0 – 40
Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40 (inclusive), up to 8 characters.)
|
login/password_charset
|
This parameter defines the characters of which a password can consist.
Permissible values:
· 0 (restrictive): The password can only consist of digits, letters, and the following (ASCII) special characters :!"@ $%&/()=?'`*+~#-_.,;:{[]}/<>| and space
· 1 (backward compatible, default value): The password can consist of any characters including national special characters (such as ä, ç, ß from ISO Latin-1, 8859-1). However, all characters that are not contained in the set above (for value = 0) are mapped to the same special character, and the system therefore does not differentiate between them.
· 2 (not backward compatible): The password can consist of any characters. It is converted internally into the Unicode format UTF-8. If your system does not support Unicode, you may not be able to enter all characters on the logon screen. This restriction is limited by the codepage specified by the system language.
With login/password_charset = 2, passwords are stored in a format that systems with older kernels cannot interpret. You must therefore only set the profile parameter to the value 2 after you have ensured that all systems involved support the new password coding.
Available in the standard system as of SAP Web AS 6.40.
|
login/min_password_diff
|
Defines the minimum number of characters that must be different in the new password compared to the old password.
Default value: 1; permissible values: 1 – 40
Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40 (inclusive), up to 8 characters.)
|
login/password_expiration_time
|
Defines the validity period of passwords in days.
Default value: 0; permissible values: 0 -1000
|
login/password_change_for_SSO
|
If the user logs on with Single Sign-On, checks whether the user must change his or her password.
Available as of SAP Web AS 6.10, as of SAP Basis 4.6 by Support Package
|
login/disable_password_logon
|
Controls the deactivation of password-based logon
This means that the user can no longer log on using a password, but only with Single Sign-On variants (X.509 certificate, logon ticket). See Logon Data Tab Page
Available as of SAP Web AS 6.10, as of SAP Basis 4.6 by Support Package
|
login/password_logon_usergroup
|
Controls the deactivation of password-based logon for user groups
Available as of SAP Web AS 6.10, as of SAP Basis 4.6 by Support Package
|
login/min_password_lowercase
|
Specifies how many characters in lower-case letters a password must contain. Permissible values: 0 – 40; default value 0
Available after SAP NetWeaver 6.40
|
login/min_password_uppercase
|
Specifies how many characters in upper-case letters a password must contain. Permissible values: 0 – 40; default value 0
Available after SAP NetWeaver 6.40
|
login/password_history_size
|
Specifies the number of passwords (chosen by the user, not the administrator) that the system stores and that the user cannot use again.
Permissible values: 1 – 100 (unit: number of entries); default value 5
Available after SAP NetWeaver 6.40
|
login/password_downwards_compatibility
|
Specifies the degree of backward compatibility to be achieved. The default value is 1, where the values have the following meaning:
0
With login/password_downwards_compatibility = 0, passwords are stored in a format that systems with older kernels cannot interpret. The system only generates new (backward incompatible) password hash values.
1
The system also generates backward compatible password hash values internally, but does not evaluate these for password-based logons (to its own system). This setting is required, if this system is used as the central system of a Central User Administration that systems that only support backward compatible password hash values are also connected to the system group.
2
The system also generates backward compatible password hash values internally, which it evaluates if a logon with the new, non-backward compatible password failed. In this way, the system checks whether the logon would have been accepted with the backward compatible password (truncated after eight characters, and converted to upper-case). This is recorded in the system log. The logon fails. This setting is to allow the identification of backward incompatibility problems.
3
As with 2, but the logon is regarded as successful. This setting is to allow the avoidance of backward incompatibility problems.
4
As with 3, but no entry is created in the system log.
5
Full backward compatibility: the system only creates backward compatible password hash values.
Available after SAP NetWeaver 6.40
|
login/password_change_waittime
|
Specifies the number of days that a user must wait before changing the password again.
Permissible values: 1 – 1,000 (unit: days); default value 1
Available after SAP NetWeaver 6.40
|
login/password_compliance_to_current_policy
|
Permissible values: 0 – no check; 1 – the system checks during password logon whether the current password complies with the current password rules and forces a password change if this is not the case.
Default value: 0
Available after SAP NetWeaver 6.40
|
login/password_max_idle_productive
|
Specifies the maximum period for which a productive password (a password chosen by the user) remains valid if it is not used. After this period has expired, the password can no longer be used for authentication. The user administrator can reactivate password-based logon by assigning a new initial password.
Permissible values: 0 – 24,000 (unit: days); Default value 0, that is, the check is deactivated
Available after SAP NetWeaver 6.40
|
login/password_max_idle_initial
|
Specifies the maximum period for which an initial password (a password chosen by the administrator) remains valid if it is not used. After this period has expired, the password can no longer be used for authentication. The user administrator can reactivate password-based logon by assigning a new initial password.
This parameter replaces the profile parameters login/password_max_new_valid and login/password_max_reset_valid.
Permissible values: 0 – 24,000 (unit: days); Default value 0, that is, the check is deactivated
Available after SAP NetWeaver 6.40
|
login/password_max_new_valid
|
Defines the validity period of passwords for newly created users.
Only available in SAP Web Application Server 6.20 and 6.40.
|
login/password_max_reset_valid
|
Defines the validity period of reset passwords.
Only available in SAP Web Application Server 6.20 and 6.40.
|
Multiple Logon
Parameter
|
Description
|
login/disable_multi_gui_login
|
Controls the deactivation of multiple dialog logons
Available as of SAP Basis 4.6
|
login/multi_login_users
|
List of excepted users (multiple logon)
Available as of SAP Basis 4.6
|
Incorrect Logon
Parameter
|
Description
|
login/fails_to_session_end
|
Defines the number of unsuccessful logon attempts before the system does not allow any more logon attempts. The parameter is to be set to a value lower than the value of parameter login/fails_to_user_lock.
Default value: 3; permissible values: 1 -99
|
login/fails_to_user_lock
|
Defines the number of unsuccessful logon attempts before the system locks the user. By default, the lock applies until midnight.
Default value: 12; permissible values: 1 -99
|
login/failed_user_auto_unlock
|
Defines whether user locks due to unsuccessful logon attempts should be automatically removed at midnight.
Default value: 1 (Lock applies only on same day); permissible values: 0, 1
|
SSO Logon Ticket
Parameter
|
Description
|
login/accept_sso2_ticket
|
Allows or locks the logon using SSO ticket.
Available as of SAP Basis 4.6D, as of SAP Basis 4.0 by Support Package
|
login/create_sso2_ticket
|
Allows the creation of SSO tickets.
Available as of SAP Basis 4.6D
|
login/ticket_expiration_time
|
Defines the validity period of an SSO ticket.
Available as of SAP Basis 4.6D
|
login/ticket_only_by_https
|
The logon ticket is only transferred using HTTP(S).
Available as of SAP Basis 4.6D
|
login/ticket_only_to_host
|
When logging on over HTTP(S), sends the ticket only to the server that created the ticket.
Available as of SAP Basis 4.6D
|
Other Login Parameters
Parameter
|
Description
|
login/disable_cpic
|
Refuse inbound connections of type CPIC
|
login/no_automatic_user_sapstar
|
Controls the emergency user SAP* (SAP Notes 2383 and 68048)
|
login/system_client
|
Specifies the default client. This client is automatically filled in on the system logon screen. Users can type in a different client.
|
login/update_logon_timestamp
|
Specifies the exactness of the logon timestamp.
Available as of SAP Basis 4.6
|
Other User Parameters
Parameter
|
Description
|
rdisp/gui_auto_logout
|
Defines the maximum idle time for a user in seconds (applies only for SAP GUI connections).
Default value: 0 (no restriction); permissible values: any numerical value
|
相应tCODE: RZ11,RZ10
相关推荐
sap 的Logon的几个参数,Password Checks,Multiple Logon,Incorrect Logon,SSO Logon Ticket
自学SAP ERP必备安装包虚拟机
saplogon软件
SAP GUI Logon登陆条目为灰色,无法编辑的解决方法.
本资料适合SAP入门者,讲述了SAP诸多基本操作和技巧
SAP GUI 760 windows版下载 官方版 需要安装SAPGUI760的朋友,可以直接下载,和730有界面上的变化。 就像730是winxp而760是win10一样的感觉。
SAP GUI 770 Patch 5
最新版本的SAP GUI,可以在32位和64位Windows系统上稳定运行,此资源是.exe文件,下载后直接安装,进入后选取第一个就可以了。记住提前安装JDK8
SAP GUI 750 安装包 及 补丁3 共享
苹果系统安装SAP,包括程序,教程,JDK1.8,苹果系统安装SAP,包括程序,教程,JDK1.8
SAP 750 免密登录教程。 客户端环境:Windows10和SAP750 Patch 13 ,欢迎下载。
SAP基本操作及技巧.pptx
SAP GUI 7.5版本安装包
SAP基本操作和技巧.pptx
SAP 客户端,各种版本,目前有SAP GUI 730、GUI 740、GUI 750,GUI760和GUI 770已经补充 , 以支持各种不同的系统 另外,SAP各种问题大全(持续更新中): ...
SAP操作手册 如果需要帮助可以加Q 1390003636
通过UIPATH机器人来操作SAP实现登录功能+财务及系统运营人员+SAP系统业务自动化+节省人力,重复性工作
SAP程序调试和数据库跟踪指南.pdf
组件:SAP Logon for Windows 版本: 750 or 760 Final Release 文件名:saplogon.exe
SAP GUI730 PATCH 5 下载 由于上传大小限制,分成3分上传,也可到 http://yun.baidu.com/pcloud/album/info?query_uk=2483450874&album_id=3772808328352617342下载